Straightening your hair will make it easier to work with throughout the lace front wig installation process. lace front wig installation process

Make a cornrow at the back of your head with the tips of your fingers.

It is recommended that you pull your hair back into a ponytail before proceeding.

Please understand that you do not have to be a natural braider in order to achieve this look. In order to complete the appearance, you can smooth your hair back with a small amount of gel or holding spray to finish the look if it isn't too long or thick. Simple steps include applying gel to your hair's perimeter and brushing your hair backwards with a boar bristle brush to achieve the desired look. Make a low ponytail out of your slicked-back hair and pin it to the back of your head with bobby pins to finish the look. You should put a nylon freetress water wave curly hair cap over your natural hair after you've completed this procedure to keep it in place while you're wearing your lace front wig and prevent it from falling out. This will aid you in maintaining the proper fit of your lace front water wave hair while you are wearing it, as well.

In the event that your hair is thin and fine, it is possible to plait it into a couple of three-strand plaits (braids) and pin them to the back of your head to keep them in place. If your hair is thin and fine, however, it is not recommended. To prevent your hair from falling out during the process, braid it into a single braid and pin it to the back of your head. If your hair is particularly thick, do not braid it. After that, you should put on a wig cap to keep your hair from falling out during the healing process, if possible.

Make certain that your hair is completely dry before attempting any of the hair-flattening techniques listed above. This includes making sure that it has been thoroughly shampooed, condition, moisturized, and otherwise prepared. Following the completion of your natural hair preparation, you'll be able to begin learning how to properly attach your new lace front freetress water wave curly hair to your head the following day, following the completion of your natural hair preparation.

An item of clothing and a water wave hair are needed to complete this costume.

In the event that you do not want to use hairspray, you can substitute  glue or got2b, which are both acceptable alternatives. Comparatively speaking, when compared to traditional glue, glue spray (also known as Glued Spray) is a far superior choice. Bobby pins or hair clips can also be used as substitutes for bobby pins if necessary.

Use of cotton balls, alcohol or rubbing alcohol preparation pads, and other similar items are all highly recommended for use during this procedure.

Lining one's eyes with white eyeliner is a practice that has become increasingly popular in recent years.

Scarves made of silk or satin are also available, and they can be used to add a nice finishing touch to any outfit.

When it comes to the entire process, the process of installing your lace front wig is the part that I find the most enjoyable. It is critical that you carefully follow each of the 11 steps listed below to the letter if you want to attach your lace front wig with glue to your head correctly and successfully:

Step 1: Comb your natural hair towards the center of your head in the manner depicted in the photo. Step 2: Comb your natural hair away from your face in the manner depicted in the photo. Using the comb shown in the photo, separate your natural hair from your face in a sweeping motion.

Cleansing your hairline and bangs in the same manner as described in the first step constitutes the Second Step of the procedure.

An optional curly hair cap should be worn to complete the overall look, but it is not required.

To complete the procedure, you must put on your Lace Front Wig for the fourth and final time.

Remove any excess lace from around your ears and hairline to give the look a more polished appearance with a sharp scissor to complete the look. Make sure you don't take too much lace with you when you're cutting it.

Apply wig glue or a got2b glue spray along the hairline, just above the area where the eyeliner marks were made, and allow it to dry completely before continuing. Make use of your fingers to smooth it out even further by applying more pressure. Step 6: Tie everything together in terms of overall appearance.

After a few minutes of drying with a blow dryer, the glue will be tacky and ready to be used again.

A drop of hot glue applied to the front of your lace wig will keep it in place while you proceed to step two of this procedure.

To apply pressure to the fabric, move the lace forward and press it into the glue with your fingertips.

The removal of any excess glue from the surface of the object is the subject of step nine.

In order to complete the process, secure your lace front water wave hair in place with bobby pins for the final step.

Check that the Lace Front Wig is properly positioned in Step 11 before continuing.

Following the removal of the scarf from your head, you will be able to style your wig however you desire!