16 gauge aluminum thickness is about 1.29 mm, which belongs to the thin aluminum plate. Such skinny aluminum sheet covers 1-8 series aluminum alloys and is of extensive programs.

1050 aluminum sheet is used to make ps plates. Playstation  plate has excessive requirements on the pleasant of aluminum plate base. The apparent pleasant, flatness, and thickness difference of aluminum plate base will have an effect on the satisfactory indicators along with the grain kingdom of playstation  plate.

1100 aluminum sheets have a width of 1220mmm, 1520mm, 1550 mm, 2100mm, 2400 mm, 3000 mm,and so forth. Further, the 1100 aluminum plate additionally affords a ramification of thicknesses for customers to pick out from, which include 0.5mm, 1mm, 1.2mm, 1.5mm, 2mm, and so forth.

The anodized thin aluminum sheet is widely used for ceilings, curtain wall panels, electrical panels, furniture panels, etc. It has strong decoration, moderate hardness, and no need for complex floor treatment. 1xxx, 5xxx and 6xxx aluminum sheets are commonly chosen for anodizing.

Aluminum ceiling regularly chooses 3105 aluminum strip. The thickness is 0.7/1.Zero/1.2mm. This aluminum strip is robust and sturdy enough for any weather conditions. Similarly, it's light-weight and smooth to install. It's also smooth for the architects to design a spread of trim patterns.

At gift, there are in particular  series of automobile aluminum sheets: 5xxx and 6xxx series. 6016 aluminum sheet with a thickness of one.2mm is selected because the outer panel of the car frame. Because of the lower elastic modulus and large elastic deformation, its amount of springback after deformation is larger than that of steel materials. Consequently, whilst aluminum is used rather than metallic for light-weight layout and manufacturing, springback compensation and control for aluminum alloy stamping elements may be very crucial.

The aluminum sheet thickness is connected to the charge. Commonly, the rate of the aluminum plate with a thickness of 0.8-6.0mm is the bottom, and the price of the thinner or thicker aluminum plate might be slightly higher than this, particularly because the thinner one wishes greater instances of rolling mill processing, at the same time as the thicker one needs hot rolling mill. Aluminum sheet 4x8 is also a popular length. Welcome to go away message below to inquire what you need.